Squid rely on jet propulsion when a rapid escape is necessary A 1.5 kg squid at rest pulls 0.10 kg of water into its mantle, then ejects this water at a remarkable 45 m/s. Right after this ejection, how fast is the squid moving? Express your answer with the appropriate units.

Proteins in our body are assembled according to the instructions encoded in our DNA. The sequence of amino acids dictates the structure and function of the protein.

Proteins in our body are assembled according to the instructions encoded in our DNA. Each gene in the DNA molecule codes for the specific order of amino acids that make up a protein. The sequence of amino acids dictates the structure and function of the protein. Scientists have determined the amino acid sequences and three-dimensional conformation of numerous proteins, providing important insights into how they perform their specific functions in the body.

Answer:

3.3 mT

Explanation:

First of all, we need to find the strength of the electric field between the two parallel plates.

We have:

[tex]\Delta V=200 V[/tex] (potential difference between the two plates)

[tex]d=1.0 cm=0.01 m[/tex] (distance between the plates)

So, the electric field is given by

[tex]E=\frac{\Delta V}{d}=\frac{200 V}{0.01 m}=2\cdot 10^4 V/m[/tex]

Now we want the electron to pass between the plates without being deflected; this means that the electric force and the magnetic force on the electron must be equal:

[tex]F_E = F_B\\qE=qvB[/tex]

where

q is the electron charge

E is the electric field strength

v is the electron's speed

B is the magnetic field strength

In this case, we know the speed of the electron: [tex]v=6.0\cdot 10^6 m/s[/tex], so we can solve the formula to find B, the magnetic field strength:

[tex]B=\frac{E}{v}=\frac{2\cdot 10^4 V/m}{6.0\cdot 10^6 m/s}=0.0033 T=3.3 mT[/tex]

The magnetic field strength will allow the electron to pass between the plates without being deflected is 0.0033 T.

The electric field strength of the electron is calculated as follows;

E = V/d

E = 200/(0.01)

E = 20,000 V/m

The magnetic field strength is related to electric field in the following formula;

qvB = qE

vB = E

B = E/v

B = (20,000)/(6 x 10⁶)

B = 0.0033 T

Thus, the magnetic field strength will allow the electron to pass between the plates without being deflected is 0.0033 T.

Learn more about magnetic field here: https://brainly.com/question/7802337

The magnitude charge creates a 1.0 n/c electric field at a point 1.0 m away 1.12×10⁻⁹ C.

The influence or force that a charged particle feels in the presence of other charged particles is described by the fundamental idea in physics known as an electric field. It is a force field that surrounds electric charges and fills the entire universe. Electric charges produce electric fields, which radiate outward in all directions from those charges.

Given:

Electric field, E = 1 N/C

Distance, d = 1 m

The electric field is given as:
E = (kQ)/r²

Q = (Er²)/k

Q = (1×1²)/(9×10⁹)

Q = 1.12×10⁻⁹ C.

Hence, the magnitude charge creates a 1.0 n/c electric field at a point 1.0 m away 1.12×10⁻⁹ C.

To learn more about the Electric field, here:

https://brainly.com/question/14058164

#SPJ12

Answer: false

Explanation:

At the beginning level or novice level the player should involve in a sport at a lower level. This is because of the fact that if he starts at a higher level the player may have to perform responsibilities accordingly. The player at the higher level have to decide the strategy of the competitive sport which an experienced player can justify. But a beginner cannot take such responsibilities and the sports skills of such person may not be good.  

A positron, or an anti-electron, is a particle with a positive charge and the mass of an electron.

Answer:

1/3

Explanation:

We can solve the problem by using the lens equation:

[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}[/tex]

where

f is the focal length

p is the distance of the object from the lens

q is the distance of the image from the lens

Here we have a divering lens, so the focal length must be taken as negative (-f). Moreover, we know that the object is placed at a distance of twice the focal length, so

[tex]p=2f[/tex]

So we can find q from the equation:

[tex]\frac{1}{q}=\frac{1}{(-f)}-\frac{1}{p}=-\frac{1}{f}-\frac{1}{2f}=-\frac{3}{2f}\\q=-\frac{2}{3}f[/tex]

Now we can find the magnification of the image, given by:

[tex]M=-\frac{q}{p}=-\frac{-\frac{2}{3}f}{2f}=\frac{1}{3}[/tex]

a) 14.4 m/s

The problem can be solved by using the law of conservation of total momentum; in  fact, the total initial momentum must be equal to the final total momentum:

[tex]p_i = p_f[/tex]

So we have:

[tex]m_g u_g + m_b u_b = m_g v_g + m_b v_b[/tex] (1)

where

[tex]m_b = m_g = m = 0.53 kg[/tex] is the mass of each ball

[tex]u_g = 14.4 m/s[/tex] is the initial velocity of the green ball

[tex]u_b = 0[/tex] is the initial velocity of the blue ball

[tex]v_g=0[/tex] is the final velocity of the green ball

[tex]v_b[/tex] is the final velocity of the blue ball

Simplifying the mass in the equation and solving for [tex]v_b[/tex], we find

[tex]v_b = u_g = 14.4 m/s[/tex]

b) 12.0 m/s

This time, the green ball continues moving after the collision at

[tex]v_g = 2.4 m/s[/tex]

So the equation (1) becomes

[tex]u_g = v_g + v_b[/tex]

And solving for [tex]v_b[/tex] we find

[tex]v_b = u_g - v_g = 14.4 m/s-2.4 m/s=12.0 m/s[/tex]

c) 13.5 m/s

This time, the green ball continues moving after the collision at

[tex]v_g = 0.9 m/s[/tex]

So the equation (1) becomes

[tex]u_g = v_g + v_b[/tex]

And solving for [tex]v_b[/tex] we find

[tex]v_b = u_g - v_g = 14.4 m/s-0.9 m/s=13.5 m/s[/tex]

Final answer:

To find the final speeds of the blue ball after the green ball collides with it, the conservation of momentum principle is used, considering the green ball's various final speeds post-collision for each situation. The final speeds of the blue ball are 14.4 m/s, 12.0 m/s, and 13.5 m/s, respectively.

Explanation:

The problem involves conservation of momentum during collisions, as the surface is considered frictionless, and energy is conserved during perfectly inelastic collisions (although the question does not specify if the collisions are perfectly elastic or inelastic).

To solve for the final speed of the blue ball in each given situation, we'll apply the principle of conservation of momentum, which states that the total momentum before the collision is equal to the total momentum after the collision.

Calculating the Final Speeds

The fastest pitch ever thrown was 105 MPH. Hope this helps!

Final answer:

The fastest baseball pitch ever thrown was 160.0 km/h.

Explanation:

Nolan Ryan, a legendary professional baseball player, holds the record for the fastest baseball pitch ever thrown, clocking in at an astonishing speed of 160.0 km/h. Ryan's remarkable achievement showcases the pinnacle of pitching prowess in the world of baseball. His exceptional skill and athleticism have left an indelible mark in sports history, inspiring awe and admiration among fans and fellow athletes alike.

The record-setting pitch not only reflects the physical prowess of a seasoned pitcher but also serves as a testament to the dedication, precision, and power that define the elite echelons of professional baseball. Ryan's feat remains a remarkable benchmark in the annals of the sport, highlighting the unparalleled speed and precision achievable in the art of pitching.

I believe it’s D, an applied force.

A reaction force seems to refer to Newton’s third law, but is relatively vague to be the answer to this question.

An expected force isn’t a concept nor the name of any subject of forces that is taught within the physics textbooks.

A positive force refers to direction, a negative force can have less, equal, or even more magnitude than the positive force, thus it contradicts itself. As that’s still a force that can push or pull.

So I believe it to be D.

A force that pushes or pulls is known as an applied force. Option D is correct.

Force is defined as an object in motion, and its rate of change of momentum is called force.

here,

A force applied to an object is one that is exerted on it by another object or by an external agent. This force can cause the object to accelerate or change direction. Pushing a book across a table, pulling a sled across the snow, or lifting a weight with a pulley are all examples of applied forces.

It is important to note that for every applied force, there is an equal and opposite reaction force, according to Newton's third law of motion. This means that when an object exerts a force on another object, the second object exerts an equal and opposite force back on the first object. This reaction force is also an applied force, and it can affect the motion of both objects involved.

Learn more about force here:

https://brainly.com/question/26115859

#SPJ6

Answer:

b. doubled

Explanation:

The momentum of an object is given by

[tex]p=mv[/tex]

where

m is the object's mass

v is its velocity

We see that the momentum is directly proportional to mass. Therefore if the speed of the object is unchanged, but the mass is doubled: m' = 2m, the new momentum will be

[tex]p'=m' v=(2m v)=2 (mv) = 2 p[/tex]

so the momentum is doubled.

Answer: B.Heat is never converted completely into mechanical energy.

Explanation:

According to the second principle of thermodynamics:  

"The amount of entropy in the universe tends to increase over time"

However the first formulation of this law (by Sadi Carnot) states:

"There is an upper limit to the efficiency of conversion of heat to work, in a heat engine "

This means the heat cannot be completely transformed into mechanical energy in a machine. That is why a machine's effieciency is always less than 100%

Answer:

B

Explanation:

Use logic

Answer:

C) velocity is zero.

Explanation:

In a simple harmonic motion, the total mechanical energy of the system (which remains constant in absence of friction) is given by the sum of the elastic potential energy (U) and the kinetic energy (K) at any moment of the motion:

[tex]E=U+K=\frac{1}{2}kx^2+\frac{1}{2}mv^2[/tex]

where

k is the spring constant

x is the displacement

m is the mass

v is the speed

Since E is a constant number, we immediately see from the formula that, when U increases, K decreases, and viceversa. Therefore, the maximum displacement (maximum x), which corresponds to the maximum potential energy U, will occur when K (kinetic energy) is zero. But K=0 means v=0, so when the velocity is also zero.

Answer:

D) Q/2

Explanation:

The relationship between charge Q, capacitance C and voltage drop V across a capacitor is

[tex]Q=CV[/tex] (1)

In the first part of the problem, we have that the charge stored on the capacitor is Q, when the voltage supplied is V. The capacitance of the parallel-plate capacitor is given by

[tex]C=\frac{\epsilon_0 A}{d}[/tex]

where [tex]\epsilon_0[/tex] is the vacuum permittivity, A is the area of the plates, d is the separation between the plates.

Later, the voltage of the battery is kept constant, V, while the separation between the plates of the capacitor is doubled: [tex]d'=2d[/tex]. The capacitance becomes

[tex]C'=\frac{\epsilon_0 A}{d'}=\frac{\epsilon_0 A}{2d}=\frac{C}{2}[/tex]

And therefore, the new charge stored on the capacitor will be

[tex]Q'=C'V=\frac{C}{2}V=\frac{Q}{2}[/tex]

The sky appears blue because the blue wavelength of light from the sun is scattered more by the air molecules that the other colors. The sky appears with a red hue at dawn and sunsets because the red spectrum is able to pass through the longer atmosphere in the oblique angle while blue light is scattered well before.  

Answer: the scattering and reflection of light by dust particles

Explanation:

Answer:

A) The current increases

Explanation:

In the DC limit (that means, very low frequency of the generator), the capacitor acts as an open circuit. In fact, a capacitor consists of two parallel plates which are separated from each other: this means that the current cannot flow through it, but it can only flow through the rest of the circuit.

In the case of a direct current (DC), therefore, the current in the circuit must be zero. For an AC current with very low frequency, the current is still very low, because the polarity of the generator changes direction not very often, so there is still enough time for the capacitor to "block" the current. However, when the frequency of the generator is increased, the polarity changes so fast that the current in the circuit can flow without having time of "hitting" the capacitor, so it has almost no effect and the current in the circuit is maximum.

Since the kinematic equations include four variables, you only need to know three of the variables to solve for the unknown. Therefore you answer is 3.

To solve using one of the kinematic equations a person must know the value of three variables.

The Equation of Kinematics shown below,

                            [tex]v=u+at\\ \\ s=ut+\frac{1}{2}at^{2} \\ \\ v^{2}=u^{2}+2as [/tex]

Where u is initial velocity, v is final velocity, a is acceleration and t is time , s  is distance.

From observing above equations, there are 4 variables present in all equation.

Hence, To solve using one of the kinematic equations a person must know the value of three variables.

Learn more:

https://brainly.com/question/11298125

. Chemical energy into kinetic energyd.

1) c. 2 m/s

Explanation:

The relationship between frequency, wavelength and speed of a wave is

[tex]v=\lambda f[/tex]

where

v is the speed

[tex]\lambda[/tex] is the wavelength

f is the frequency

For the wave in this problem,

f = 4 Hz

[tex]\lambda=0.5 m[/tex]

So, the speed is

[tex]v=(0.5 m)(4 Hz)=2 m/s[/tex]

2)  a. 2.8 m/s

The speed of the wave on a string is given

[tex]v=\sqrt{\frac{T}{\mu}}[/tex]

where

T is the tension in the string

[tex]\mu[/tex] is the linear mass density

In this problem, we have:

[tex]T=2 \cdot 4 N=8 N[/tex] (final tension in the rope, which is twice the initial tension)

[tex]\mu = 1 kg/m[/tex] --> mass density of the rope

Substituting into the formula, we find

[tex]v=\sqrt{\frac{8 N}{1 kg/m}}=2.8 m/s[/tex]

Brain signals are converted

The binary system that is most likely to contain a black hole is option B, a binary with an X-ray burster.

Space-based black holes are areas where a tremendous amount of mass is crammed into a very small space. As a result, there is an intense gravitational force that prevents even light from escaping. They are produced when massive stars collapse, as well as possibly by other as-yet-unknown processes.

Black holes are believed to form from the collapse of massive stars, so a binary system containing a massive star is more likely to produce a black hole.

Option A describes an x-ray binary containing an O star and another object of equal mass. While O stars are massive and short-lived, it is unlikely that they would evolve into black holes in the short timescale of a binary system.

Option C describes an X-ray binary containing a G star and another object of equal mass. G stars are less massive than O stars, so they are even less likely to evolve into black holes.

Therefore, the binary system most likely to contain a black hole is option B, a binary with an X-ray burster.

Learn more about black holes here:

https://brainly.com/question/10597324

#SPJ6

Answer:

377 kPa

Explanation:

The absolute pressure of a gas is given by the sum of its gauge pressure and the atmospheric pressure:

[tex]p=p_0 + p_g[/tex]

where

[tex]p_0 = 101 kPa[/tex] is the atmospheric pressure

[tex]p_g[/tex] is the gauge pressure of the gas

In this problem, the gauge pressure of the gas is [tex]p_g = 276 kPa[/tex]. Therefore, the absolute pressure is

[tex]p=101 kPa+276 kPa=377 kPa[/tex]

ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh this confused mee

Answer:

Zero

Explanation:

The work done on an object is given by:

[tex]W=Fd cos \theta[/tex]

where

F is the force applied on the object

d is the displacement of the object

[tex]\theta[/tex] is the angle between the direction of the force and the displacement

In this problem, you are pushing again a stationary wall: this means that the walls does not move. As a result, the displacement is zero: d=0. Therefore, the work done is also zero: W=0.

Final answer:

To find the position of the ball, y, in terms of time, t, we need to consider the forces acting on the ball. The weight of the ball and the force due to air resistance act in opposite directions. By using Newton's second law and integrating the velocity function, we can determine the position function of the ball.Therefore, the position of the ball, y, in terms of time, t, is given by y(t) = -(gt²)/2

Explanation:

To find the position of the ball, y, in terms of time, t, we need to consider the forces acting on the ball. The weight of the ball, mg, and the force due to air resistance, 4v, act in opposite directions. The net force can be calculated using Newton's second law, F = ma.

Using the equation F = ma, we have mg - 4v = ma. Rearranging the equation to solve for v, we get v = (mg - ma)/4. Substitute the given values of m = 0.096 kg, g = 9.8 m/s², and a = 0.075 m/s²into the equation to find v. Then, integrate the velocity function to find the position function y(t).

After solving the integration, we get y(t) = -(gt²)/2 + C, where C is the constant of integration. To find the value of C, we can use the initial condition y(0) = 0. Substituting the values, we find C = 0.

Therefore, the position of the ball, y, in terms of time, t, is given by y(t) = -(gt²)/2

Atmospheric friction causes an artificial satellite to lose kinetic energy and spiral inward, leading to an increase in its orbital speed due to conservation of angular momentum and stronger gravitational pull at lower altitudes.

Friction with the atmosphere affects the speed of an artificial satellite by causing it to lose energy and gradually spiral inward towards Earth. As a satellite encounters atmospheric drag, it slows down, converting its kinetic energy into heat. Despite this initial deceleration, the satellite's orbital speed actually increases as it gets closer to Earth due to conservation of angular momentum and the increase in gravitational force at lower altitudes.

The circular satellite velocity needed to maintain an orbit close to Earth's surface is approximately 8 kilometers per second, whereas the escape velocity from our planet is 11 kilometers per second. When an artificial satellite like the Apollo mission reentry capsule experiences friction, the air ahead of it is compressed and heated, causing the satellite to glow red hot and lose speed.

However, this is also connected to the principles of gravitation, as demonstrated by the satellite's acceleration inward. This is analogous to an elastic string attached to a whirling stone which shortens due to air friction, causing the stone to spiral inward. Thus, as friction with our atmosphere causes a satellite to descend closer to Earth, the gravitational pull becomes stronger and the satellite's orbital speed increases, even though its total energy is decreasing because of atmospheric drag.

Answer: B. Its randomness would increase

Explanation:

According to the second law of thermodynamics:  

"The amount of entropy in the universe tends to increase over time"

That is, in any cyclic process, entropy will increase, or remain the same.

So, in this context, entropy is a thermodynamic quantity defined as a criterion to predict the evolution or transformation of thermodynamic systems. In addition, it is used to measure the degree of organization of a system.  

In other words: Entropy is the measure of the disorder (or randomness) of a system and is a function of state.

Using the principle of conservation of energy, we can determine that Tarzan's speed at the bottom of his swing is 21.7 m/s.

The physics problem you have revolves around concepts of kinematics, potential energy and kinetic energy. The total energy in a closed system is conserved. Tarzan's potential energy, when he's at the top of his swing, gets converted to kinetic energy when he is at the bottom of his swing. This fundamental principle is due to the law of conservation of energy.

We can use the potential energy to solve for Tarzan's speed at the bottom of the swing. Tarzan's height, h, at the top of the swing can be found from the equation for the length of the vine and cos(37 degrees) - h = 30m * cos(37), which gives 23.9m. Initially, the total energy is just potential energy, E = m * g * h, and finally just kinetic energy, K = 1/2 * m * v^2.

Equating these two (E=K) gives us m * g * h = 1/2 * m * v^2. The mass cancels and we solve for the speed, v = sqrt(2 * g * h). Using 9.8 m/s^2 for g and 23.9m for h, we can find that v = 21.7 m/s. So Tarzan's speed at the bottom of his swing is 21.7 m/s.

https://brainly.com/question/13345660

#SPJ12

Tarzan's speed at the bottom of his swing, given a vine length of 30 m and swing angle of 37 degrees, would be roughly 9.4 m/s. This calculation is based on the principles of conservation of energy and pendulum motion in physics.

The subject of this question deals with the concepts of physics, specifically pertaining to pendulum motion and the conservation of energy. Tarzan's speed at the bottom of his swing can be calculated using potential and kinetic energy principles.

When Tarzan is at the top of his swing, all of his energy is gravitational potential energy. As he swings downwards, this potential energy transfers to kinetic energy, which is the energy of movement. The total energy in the system remains constant due to conservation of energy.

The equation we'll use to find Tarzan's speed comes from setting the gravitational potential energy equal to the kinetic energy at the bottom of his swing, thus: mgh = 1/2 * m * v^2. Here, 'm' is the mass (which actually cancels out), 'h' is the height fallen, 'g' is acceleration due to gravity, and 'v' is the speed we want to find. As Tarzan starts at rest, his potential energy is mgh where h = L(1 – cosθ).  We substitute this height into the previous expression solved for speed to get:

v = sqrt(2gh) = sqrt[2 * (9.8 m/s²) * L(1 – cosθ)]. For a vine length L = 30.0 m and swing angle θ = 37 degrees, we find v = sqrt[2 * (9.8 m/s²) * (30m *(1 – cos37°))] ≈ 9.4 m/s.

https://brainly.com/question/16624499

#SPJ2

The most common atom of iron has 26 protons and 30 neutrons in its nucleus. What are its atomic number, atomic mass, and number of electrons if it is electrically neutral? This atom has atomic number 26, atomic mass 56, and has 26 electrons.

Answer :The mass number is 56.

Explanation:

Mass number is defined as the sum of number of protons and neutrons that are present in an atom.

Mass number = Number of protons + Number of neutrons = 26+ 30 =56

Atomic number is defined as the number of protons or number of electrons that are present in an atom.

Atomic number = Number of electrons = Number of protons = 26

Hence, neutrons and protons affects the mass number and thus the mass number will be 56.

An object's gravitational potential energy is

(mass) x (gravity) x (height above ground) .

I don't see the object's speed anywhere in that formula, do you ?

An object's speed has no effect whatsoever on its potential energy ... only if it changes the object's height above ground.

the north end to the south end.

Answer

the answer is option A/ "north end to the south end"

Explanation: